Fuse arc extinguishing device.air conditioner fuse block pull-out replacement_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

05 2023-07

Share:

　　

　　The fuses used in power circuits and high-power equipment not only have the three parts of a general fuse, but also have arc extinguishing devices. This type of fuse not only protects the circuit with a high working current, but also has a high voltage at both ends when the melt melts. Often, the melt has melted (melted) or even vaporized, but the current is not cut off, The reason is that at the moment of fusing, under the action of voltage and current, an arc pulling phenomenon occurs between the two electrodes of the fuse. This arc extinguishing device must have strong insulation and good thermal conductivity, and be negatively charged. Quartz sand is a commonly used arc extinguishing material.

　　Fusing device

　　In addition, some fuses have a blown indicator device, which is used to indicate that when the fuse is activated (blown), its appearance changes to a certain extent, making it easy for maintenance personnel to detect, such as emitting light, discoloring, and popping up solid indicators.home energy storage system battery

　　

Read recommendations:

40 amp auto fuse

plug fuse types

mini blade fuse tap Factory.The production method of direct insertion fuse tube

fast blow or slow blow fuse for multimeter

PREVIOUS:Basic composition of fuses.how to test a refrigerator bimetal thermostat

Return

Next：Intelligent fuse.temperature switch thermostat thermal protector fuse

Related News

November 11,2023

air conditioner fuse box replacement..Application scope of patch self recovery insurance

　　　　Self recovery fuses can be divided into patch based self recovery fuses and plug-in self recovery fuses. With the increasing miniaturization of product requirements, the range of use of patch based fuses has increased.　　The main encapsulation of SMD self recovery fuses are: 0805, 0603, 1206, 1812, 2920, and their working principle is:　　The self recovery fuse is composed of specially treated polymer resin and conductive particles (Carbon Black) distributed inside. Under normal operation, the polymer resin tightly binds conductive particles outside the crystalline structure, forming a chain like conductive electrical pathway. At this time, the recoverable fuse is in a low resistance state (a), and the heat generated by the current flowing through the self recovering fuse on the circuit is small and does not change the crystal structure. When a circuit experiences a short circuit or overload, the heat generated by the large current flowing through the self recovery fuse causes the pol

July 14,2023

Precautions for installation of Thermal cutoff.alienware thermal controller error

　　　　Precautions for installation of Thermal cutoff: 1. When the lead wire is bent for use, it should be bent from the part more than 6mm away from the root; When bending, it is not allowed to damage the roots and leads, and it is not allowed to forcefully pull, press, or twist the leads. 2. When the thermal fuse is fixed by screws, riveting, or wiring terminals, it should be able to prevent mechanical creep and the occurrence of poor contact. 3. The connecting components should be able to work reliably within the working range of the electrical product, without displacement due to vibration and impact. When conducting wire welding operations, the heating humidity should be limited to the minimum, and attention should be paid not to apply high temperatures to the thermal fuse; Do not forcefully pull, press, or twist the thermal fuse and leads; After welding, it should be immediately cooled for more than 30 seconds. 5. The thermal fuse can only be used under the specified rated voltage,

September 04,2023

The Protection Application of Self Recovery Fuses in Electric Toys.fast acting fuse bussmann

　　　　With the development of technology and social progress, people are paying more and more attention to the intellectual development of infants and young children. Various educational toys are springing up one after another, including electric and non electric ones, with thousands of types and varying quality requirements.　　When people purchase toys, they often pay more attention to their playable functions and neglect their safety. Many toy quality issues are only taken seriously when accidents occur, but it is too late and have already caused harm to people, some of which may last for a lifetime.　　In foreign countries and particularly developed countries, the safety of electronic toys is the most important. Regardless of certification, testing, research and development design, customer requirements, etc., the first consideration is safety, followed by the functions of toys, especially electric toys. Therefore, the safety protection of toys is the primary issue. In clause 3.6.2 of th

September 08,2023

The influence of actual working current on fuse selection.are plastic fuse boxes legal

　　　　1. It should be noted that in the early stages of understanding the normal working current of a product, it is often not particularly accurate. Because an electronic engineer often amplifies the parameters naturally and habitually when selecting device models, such as the actual measurement value being 0.42A, but habitually setting it at 0.5A, and may even consider it safe to perform some amplification, setting it at 0.8A. This is a common practice for electronic engineers when selecting self restoring fuses.　　2. For some products, when the current is not constant, the maximum current of the product is often taken as the normal working current. Therefore, it is necessary to understand at this time:　　A. The current at which the product operates for a long time (usually);　　B. The duration of the maximum current;　　C. The frequency (time interval) of the maximum current repetition.　　When the maximum peak current of the product is not very large (less than twice), the duration is not ve

December 05,2023

tv fuse replacement cost.Basic Knowledge of Chip Fuses

　　　　Firstly, understand the function of fuses: Place the circuit fuse correctly. Then, the fuse will rise to a certain height and after a certain period of time, the fuse will cut off the current, thus protecting the operation of the circuit. The principle of patch fuses is the same, but the style is different. Below, we will have a detailed understanding:　　Chip fuses are mainly used in electronic products such as digital cameras, laptops, and smartphones. Due to differences in product technology, the selection focus varies from traditional glass tube fuses to micro fuses and chip fuses. The selection of chip fuses involves the following factors:　　The normal operating current of the circuit. The working current through the fuse should not exceed 70% of the rated current of the fuse.　　Pulse, surge current, surge current, starting current, and circuit transient. Chip fuses pay special attention to the following facts: due to the small process size, the impact resistance of chip fuses is