Insert fuse.mini blade auto fuses_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

24 2023-07

Share:

　　

　　According to size, it can be divided into small, medium, and large car fuses. The current includes: 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A, 50A, 60A, 80A, 100A; In plug-in car fuses, each color represents a different current of the car fuse. Certification includes UL, CSA, and ROHS. The types can also be divided into: MIN-N 2A Lt.grey, 3A Violet, 4A Pink, 5A Tan, 7.5A Brown, 10A Red, 15A Blue, 20A Yellow, 25A Natrual, 30A Green, 35A Pupel, 40A Orange/32V plastic zinc alloy 11x4x11mm

　　ATY-N 2A Lt.grey, 3A Violet, 4A Pink, 5A Tan, 7.5A Brown, 10A Red, 15A Blue, 20A Yellow, 25A Natrual, 30A Green, 35A Pupel, 40A Orange plastic zinc alloy 19x5x18.5mm

　　MAX-N 20A Yellow, 25A Natrual, 30A Green, 35A Pupel, 40A Orange, 50A Red, 60A Blue 70A Tan, 80A Natural, 100A Violet/32V

Read recommendations:

bunn coffee maker thermostat replacement

ups fuse replacement

auto blade fuse types

motorcycle fuse box waterproof.What parameters should be noted for patch fuses

LED faces the opportunity of upgrading and upgrading, and the fuse industry will take another leap forward.air conditioner fuse block pull-out

PREVIOUS:High voltage fuse.battery fuse terminal

Return

Next：Fuse resistance.demand lighting fuse

Related News

September 18,2023

LED faces the opportunity of upgrading and upgrading, and the fuse industry will take another leap forward.air conditioner fuse block pull-out

　　　　At present, LED products face the problem of relatively high costs. In terms of low-power lighting equipment, they cannot compete with rare earth energy-saving lamps, fluorescent lamps, and high-power high-pressure sodium lamps and halogen lamps.　　LED electroluminescence has high efficiency, but at the same time, it generates a lot of heat, which leads to LED light decay and ultimately shortens its working life. Moreover, LED lighting equipment faces the ceiling in terms of technology. Due to its low power of individual light-emitting components, it is necessary to combine them into relatively high power for practical use, which is a challenge.　　In order to dissipate heat, the engineering community has adopted various current heat dissipation technologies, including the most common metal fin heat sink, forced exhaust, heat pump refrigeration, heat pipe, phase change, and other heat dissipation and cooling technologies. This has led to LED lighting products with large volume, weight

September 23,2023

How to Choose the Rated Voltage and Current of Chip Fuses.30 amp screw in resettable fuse

　　　　How to choose the rated voltage and current of a patch fuse: The rated voltage of a patch fuse depends on the current flowing through it, and is not related to the working voltage of the circuit. From the perspective of safe use, the rated voltage of SMD fuse is proposed, which is the highest working voltage of the circuit when the SMD fuse is in a safe working state. This means that fuses can only be placed in circuits with a working voltage less than or equal to the rated voltage of the fuse. Only in this way can the fuse operate safely and effectively.　　The voltage drop at both ends of the patch fuse is very small, much lower than the rated voltage of the patch fuse. Therefore, during normal operation, the rated voltage has no practical significance. The true significance of the rated voltage of patch fuses lies in their safety performance. Chip fuse, as a safety component, must be relatively safe during normal operation, protective action, and any time period after melting. The

July 04,2023

Fuses

　　　　Fuse, alias current fuse, is defined as "fuse link" in IEC127 standard and is a thermal Response element. The fuse is installed in a fuse box (fuse) or knife switch and connected in series in the circuit. The fuse invented by Edison over a hundred years ago was used to protect expensive incandescent lamps at that time.　　The fuse is mainly composed of three parts: the melt part, the electrode part, and the bracket part. Fuses are generally made of fusible metals such as lead, tin, lead-tin alloy, or zinc, with a very low melting point (approximately 200-300 ℃). Under normal circumstances, fuses can maintain reliable operation of the power grid, but in the event of overload or short circuit conditions, fuses with lower melting points are heated to the melting temperature by current and continue to be heated, causing some fuses to melt and vaporize, thereby cutting off the protected circuit and ensuring the safety of electrical appliances and connecting wires. Fuses are composed of po

September 08,2023

Which is better, disposable fuse or self restoring fuse.surface mount fuse letter code

　　　　From a structural perspective, a self restoring fuse is composed of a polymer polymer, essentially a positive temperature coefficient thermistor. It provides circuit protection through the positive correlation between the resistance value of PTC material and temperature, as well as the sudden change at the Curie temperature point. It can be reused without frequent replacement; Disposable fuses are made of ordinary fuse materials, so they cannot be used again after each action and require frequent replacement.　　From the perspective of working action, they can all be used for overcurrent protection of circuit currents and can be interchanged in many occasions. For example, in battery protection applications where overcurrent protection requirements are not too high, these two types of products can both lead the way and can even be replaced, and most of the time, each has its own field.　　In the protection application of certain important devices such as ICs, or in the input/output ter

October 11,2024

Guide to Current Fuse Selection

　　　　Selecting the appropriate current fuse is crucial for the safety and efficient operation of an electrical system. Firstly, one must consider the rated current of the circuit. The rated current of the fuse should be slightly higher than the normal operating current of the circuit. For example, if a circuit typically operates at 5 amperes, a fuse with a rated current of around 5 - 7 amperes might be suitable. However, it should not be too high, as this may lead to a situation where the fuse does not blow when it should during an overload or short - circuit.　　Secondly, the voltage rating of the fuse needs to match the circuit voltage. Using a fuse with a lower voltage rating than the circuit can be dangerous, as it may not be able to handle the electrical stress when the circuit is operating.　　The type of application also affects the fuse selection. For example, in a circuit with high inrush currents, such as those in some motor - starting circuits, a slow - blow fuse may be required.