NEC Thermal cutoff.thermal protector for motor_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

17 2023-07

Share:

　　

　　NEC Thermal cutoff has the function of detecting abnormal temperature and cutting off the circuit. It can detect abnormal temperature rise of household or industrial electrical products and quickly cut off the circuit in a timely manner, achieving the function of preventing fires from igniting.

　　NEC Thermal cutoff is a kind of element that provides very reliable protection under the condition of overtemperature. It has small size, large overcurrent, non reset, stable performance, convenient installation, and a certain range of humidity settings and bearing capacity for selection to meet customer application needs.

　　The products are widely used in various motors, copiers, fax machines, HID ballasts, fluorescent lighting ballasts, transformers, chargers, battery packs, heating appliances, electric irons, hair dryers, electric stoves, rice cookers, electric kettles, coffee pots, ventilation fans, electric fans, sewing machines, water heaters, power converters, power plug sockets, refrigerators, air conditioners, automotive air conditioners, instruments, equipment, etc. for over temperature protection.

　　The rated current is 0 Various products ranging from 5A to 15A.

　　Safety certifications include UL, CSA, VDE, BEBA, PSE, JET, CQC... certificates, which comply with the EU ROHS environmental protection directive requirements

Read recommendations:

micro chip fuse

battery terminal fuse block

250V 1.2A plug-in fuse A250-1200.resettable fuse smd

Classification of fuses and fuses.where is the air conditioner fuse located

PREVIOUS:Precautions for installation of SEFUSE Thermal cutoff.radial thermal fuse

Return

Next：Delay fuse principle.carrier fuse

Related News

August 22,2023

6 * 30 fuse clip model classification.250ma radial fuse

　　　　Fuse clip refers to the terminal where a fuse is installed, which can generally be divided into current fuse clip and automotive fuse clip. There are generally three surface coatings: nickel plating, tin plating, and silver plating. The model of the current fuse clip is generally reflected by the size of the installed fuse, such as 3 * 10, where 3 * 10 is the fuse size, and 5 * 20, 6 * 30, and 10 * 38 are the main four dimensions. The corresponding dimensions are the corresponding models, one-on-one, and there is no specific model　　At present, the material commonly used by domestic fuse clamp manufacturers is brass, which is the best and best conductive metal material. In addition, not only do fuse clamps use brass as a conductive material, but many other electronic components also use it.　　So what are the characteristics of brass? Why do we choose it as a carrier for electronic component materials?　　In fact, there are only five points: firstly, brass has good conductivity and low

July 05,2023

Fuse appearance.resettable surface mount fuse

　　　　1. Filamentous. Early primitive fuses were directly locked with screws and used for various sizes of old-fashioned switches and sockets.　　2. Flaky (bare flake). More convenient to use than traditional filiform.　　3. Glass tube shaped. There are several different sizes, commonly found in electronic products.　　6.3 x 32 mm (diameter x length)　　5 x 20 mm　　4. Ceramic tubular. There are several different shapes and sizes to avoid glass bursting.　　5. Plastic sheet with metal sheet connector: automotive fuse.　　6. Surface mounted component (SMD) type.　　7. Cylindrical, plug-in type: directly soldered onto the circuit board, used internally in the product.

November 03,2023

surface mount fuse block.What are the common parameter terms for single use SMD fuses?

　　　　Voltage rating: The voltage rating of a fuse must be equal to or greater than the effective circuit voltage. The standard voltage rating series for general patch fuses are 24V, 32V, 48V, 63V, and 125V.　　Resistance: The resistance of a fuse is not very important in the entire circuit. But for fuses with an amperage less than 1, the resistance will be a few tenths of an ohm, so this issue should be considered when using fuses in low-voltage circuits. Most fuses are made of positive temperature coefficient materials, so there are also two types of resistors: cold resistance and thermal resistance.　　Environmental temperature: Fuses are temperature sensitive components. The current carrying capacity of the fuse was tested at an ambient temperature of 25 ℃. The higher the ambient temperature, the higher the operating temperature of the fuse, the lower the current carrying capacity of the fuse, and the shorter its lifespan. On the contrary, at relatively low temperatures, the lifespan of

August 07,2023

What are the types of Thermal cutoff.thermal protector recessed light

　　　　Temperature controlled fuses are mainly used for circuit maintenance. When the temperature of household appliances exceeds the rated temperature of the fuse, they will automatically open the circuit breaker to avoid damage caused by excessive temperature. According to different composition methods, which types can temperature controlled fuses be classified? How to apply it correctly? Let's take a look!　　1. Organic type temperature control fuse.　　It consists of moving contact points, melt, and torsion springs. The principle is to improve the fluidity of the surrounding environment during operation, melt, weaken the ductility of the torsion spring, cause the left line to separate from the moving contact point, disconnect the current, and disconnect the circuit.　　2. Ceramic tube type temperature control fuse.　　This type of fuse is famous for its insulated porcelain tube. During operation, the temperature increases, causing the mixture to evaporate. After the dissolution point, the int

December 11,2023

motorcycle fuse box design.6V fuse

　　The product variety is diverse and the specifications are complete, mainly including various series such as overcurrent protection components (PPTC) mounting, pins, rings, long bars, etc. The advanced, efficient and experienced manufacturing team can meet the dynamic delivery requirements of the current rapid development of the manufacturing industry.　　In recent years, with the rapid development of fuse PPTC technology and market demand, our company has established a factory with independent chips and developed and produced a large number of SMT fuses and direct insertion fuse production lines in various packaging forms, such as 1812-1206-1210-0805-2920-0603 direct insertion fuse 16V 30V 60V 72V 90V 250V;　　Our company has excellent equipment, abides by the contract, delivers on time, and offers reasonable prices, with the aim of "honesty and trustworthiness, innovation, perfect quality, and customer satisfaction". Welcome customers to call, write inquiries, and contact us! We are wil