power fuse supply
中文
Online Message
Online Message
News & Events News & Events

News & Events

Keep abreast of company dynamics

The purpose and specifications of automotive fuses.resettable 3 amp fuse

07

2023-08

Share:

　　

　　With the digitization and digitization of automotive electrical equipment. The improvement of mechanical equipment and the miniaturization of fuses have resulted in an improvement in the total number of fuses used in each vehicle. Let's take a look at the purpose and specifications of car fuses.

　　The main uses of automotive fuses are:

　　1. At every critical link (or component) of the car route, it is usually equipped with a plug-in or cylindrical shape. Pin like porcelain. Unique commercial insurance, such as junction boxes. There are various varieties with different purposes.

　　2. The commercial insurance installation of general plugins is located in areas that are conducive to installation, disassembly, and replacement. In areas where the working voltage (current) of the line fluctuates less, except for special circumstances, it is generally not easily damaged and maintenance is more convenient.

　　3. Various commercial insurance car companies have different methods of formulating their design plans, some of which are mainly focused on. Routes in high-risk areas. Even commercial insurance installed in relatively high calorific value areas will have higher demand. Generally speaking, like some plugins, it cannot be replaced.

　　4. The commercial insurance for other plugins will be equipped with several pieces in the car, such as fuse boxes, for the convenience of buyers' daily emergency use.

Read recommendations:

surface mount fuse holder

slow fuse vs fast fuse

tvs fuse

Fuses

Self recovery performance and working process of self recovery fuses

PREVIOUS:What are the principles for selecting fuses.resettable 15 amp fuse

Return

Next：What is the method for replacing car fuses?resettable 30 amp fuse

Related News

September 18,2023

The Application of Self Recovery Fuses in RS485 Interface.volvo truck blower motor fuse location

　　　　As is well known, the interface of intelligent instruments was originally RS232, which can achieve point-to-point communication, but this method cannot achieve networking function. The subsequent RS485 resolved this issue. So the current RS485 interface is quite popular among intelligent instruments. Today, the editor will explain the application of self recovery fuses in the RS485 interface.　　RS485 has the advantages of long communication distance (over 1200m), high transmission rate (10Mbps), high signal-to-noise ratio, convenient control, low cost, and the ability to achieve multiple nodes on a single bus, as well as a variety of transceivers that can be used. It has been increasingly recognized by users.　　However, with the increase in usage frequency, the problems encountered by RS485 become more apparent. Due to its low voltage (only 5V), when using intelligent instruments with RS485 interfaces, the withstand voltage of the components themselves is also low, resulting in insta

July 06,2023

Fuse related instructions.fast acting fuse is used for protection against

　　　　1. When operating at a normal operating current of 25 ℃, the current rating of the fuse should usually be reduced by 25% to avoid harmful blowing. Most traditional fuses use materials with lower melting temperatures. Therefore, this type of fuse is relatively sensitive to changes in ambient temperature. For example, a fuse with a current rating of 10A is usually not recommended to operate at an ambient temperature of 25 ℃ and a current greater than 7.5A.　　2. The voltage rating of the fuse must be equal to or greater than the effective circuit voltage. The general standard voltage rating series are 32V, 125V, 250V, and 600V.　　3. The resistance of a resistor fuse is not important in the entire circuit. Since the resistance of a fuse with an amperage less than 1 is only a few ohms, this problem should be considered when using a fuse in a low-voltage circuit. Most fuses are made of materials with a positive temperature coefficient, so there are two types of resistors: cold resistance a

August 04,2023

Self inspection method for waterproof fuse holder.ptc resettable fuse tutorial

　　　　After a period of application, waterproof fuse holders are likely to encounter some difficulties. Therefore, in the case of application, it is necessary to frequently inspect them, and its appearance should be inspected first. Based on years of experience, Linda will provide the following:　　(1) Look at its appearance, feet, and surface areas. There are signs of rusting, deformation, or broken feet on the wood.　　(2) Check the surface of the waterproof fuse holder for any contamination or scratches.　　(3) To see if there are any deformation or cracks, and to ensure excellent practical application results throughout the entire application process, it is necessary to ensure that the appearance meets the requirements.　　It is not difficult to see from this that circuit safety is crucial, especially in hot summer when natural phenomena are still highly prevalent. Against this objective background, it is important to ensure the professionalism of circuit maintenance, especially in troublesh

August 03,2023

What is the principle and material of a fuse.mini blade fuse box

　　　　When current passes through a conductor, contact occurs and the conductor may generate heat because it has a certain resistance. And the calorific value is calculated according to this formula: Q=0.24I2RT.　　2. Among them, Q is a calorific value and 0.24 is a parameter. I is the current flowing through the conductor, R is the resistance of the conductor, and T is the time flowing through the conductor. By using this formula, you can easily discover the simple principle of fuses.　　When the raw materials and appearance of the fuse manufacturing are clear, its resistance R is relatively clear (if its resistance temperature coefficient is not considered). When an electric current flows through it, it becomes hot, and over time, its calorific value also increases.　　4. The height of current and resistance determines the speed of thermal energy, while the structure and assembly of the fuse determine the speed of thermal energy loss. If the speed of thermal energy is lower than the speed of

January 22,2024

Structure of fuse holder

　　　　The structure of a fuse holder mainly consists of the fuse holder body, base, terminals, pins, etc. Below, we will introduce these structures separately.　　The fuse holder body is the main part of the fuse holder, which is usually made of insulating material and can fix the fuse, pins, and terminals. The shape, size, structure, and material selection of the fuse holder body will have a significant impact on the performance and reliability of the fuse holder. The fuse holder body is usually divided into various shapes such as cylindrical, square, rectangular, etc., and different shapes and sizes can be selected according to different application scenarios. In addition, the insulation material of the fuse holder body should have good insulation performance, heat resistance, and chemical corrosion resistance to ensure the safety and reliability of the fuse holder.　　The base of a fuse holder is usually made of metal material, used to fix the fuse holder body, pins, and terminals. The ma

+86 755 89762685

MB:+86 13924633629 Ms.vicky

E-mail: waimao@xcfuse.com


Factory :

XC Electronics(Shenzhen)Corp.,LTD

Add: Jinyuan Industrial zone,Heao, Henggang, Shenzhen 518115,China


Shenzhen branch: Shenzhen Xucheng Electronic Commerce co.Ltd

Add: 8-15 Jinyuan Industrial zone,Heao, Henggang, Shenzhen 518115,China

About Us Products Resource Solutions Certifications News & Events Contact Us

© Copyright. xc 2023. All rights reserved.粤ICP备11049369号