power fuse supply
中文
Online Message
Online Message
News & Events News & Events

News & Events

Keep abreast of company dynamics

cigarette lighter plug fuse replacement.A Brief Introduction to Aluminum Magnesium Alloy

02

2023-11

Share:

　　1a47df70812c6ad

　　5154 aluminum plate is used in welded structures, storage tanks, pressure vessels, ship structures and offshore facilities, and transportation tanks.

　　5182 aluminum plate is used in thin plate processing for easy to open can covers, automotive body panels, control panels, reinforcements, brackets, and other components.

　　5252 aluminum plate is used in the manufacturing of decorative components with high strength, such as automobiles and other decorative components. Having a bright and transparent oxide film after anodizing

　　5254 aluminum plate is used in containers for hydrogen peroxide and other chemical products.

　　5356 aluminum plate is used for welding aluminum magnesium alloy welding rods and wires with a magnesium content greater than 3%.

　　5454 aluminum plate is used in welded structures, pressure vessels, and marine facilities pipelines.

　　5456 aluminum plate is used in armor plates, high-strength welded structures, storage tanks, pressure vessels, and ship materials.

　　5457 aluminum plate is applied to decorative parts of automobiles and other equipment that have been polished and anodized.

　　5652 aluminum plate is used in storage containers for hydrogen peroxide and other chemical products.

　　5657 aluminum plate should be used for decorative parts of polished and anodized automobiles and other equipment, but in any case, it must be ensured that the material has a fine grain structure.

　　5A02 aluminum plate is used in aircraft fuel tanks and ducts, welding wires, rivets, and ship structural components.

　　5A03 aluminum plate is used in medium strength welded structures, cold stamped parts, welded containers, welding wires, and can be used to replace 5A02 alloy.

　　5A05 aluminum plate is used for welding structural components and aircraft skin frames.

　　5A06 aluminum plate is used in welded structures, cold forged parts, welded tension container load-bearing parts, and aircraft skin bone components.

　　5A12 aluminum plate is applied to welded structural components and bulletproof decks.

Read recommendations:

craftsman radial arm saw fuse

plug type fuse

high voltage fuse holder

supercheap auto blade fuse holder

power probe fuse voltage drop chart

PREVIOUS:vizio tv fuse location.How to choose a fuse for safety?

Return

Next：fast acting vs fast blow fuse.What is the material of a fuse?

Related News

September 16,2023

Analysis of the Prospects of the LED Industry, with the Fuse Industry Following a Growth Trend.resettable fuse vs fuse

　　　　With the further increase in global LED market demand, the fuse industry may have a certain impact on factory production. In the future, the development of China's LED industry will face enormous opportunities, both in terms of industry and sales, which will bring a qualitative leap to the LED industry in the market. At the same time, there is further improvement in promoting the development of the fuse industry.　　If the LED industry wants to achieve a healthier future, it is necessary to carry out free market reforms, reduce administrative intervention in industrial development, and more often focus on promoting the process of industrial standardization. Only when there is chaos in the industry, can administrative measures be used to gently correct the development path.　　The reason why the domestic LED industry is showing "photovoltaic concerns" is not due to the industry's own traps. The arrival of a wave of bankruptcy has brought a very urgent feeling to the development of the L

September 22,2023

How to choose a fuse.air conditioner fuse keeps tripping

　　　　Firstly, what is a fuse? Fuses are made of low melting point alloys, commonly used as alloys of lead and tin (75% lead and 25% tin), as well as alloys of lead, tin, and lead antimony. Generally, fuses are installed in fuse boxes (fuses) or knife switches and connected in series in the circuit. When the current in the circuit is too high, due to the thermal effect of the current, the fuse first melts and is burned out, causing the circuit to automatically cut off, thereby protecting the safety of the power supply and electrical equipment. The rated current of a fuse (the maximum allowed current) and the fusing current (the minimum current that causes the fuse to blow) are its two important parameters, and its fusing current is generally about twice the rated current. The selection of the rated current of the fuse should be correct, so that it does not blow during normal power consumption of the circuit. In case of severe overload or short circuit, it will immediately blow and automa

October 26,2023

tv fuse blows when plugged in.The impact of fuse aging on usage

　　　　After the fuse ages, there is no danger of generating the current that should be cut off and the fuse not blowing. The aging of a fuse is equivalent to a decrease in the rated value (current) rather than an increase, resulting in the circuit being cut off at a small overload current or pulse.　　The durability test in the IEC standard is the life test, which is conducted using a DC power supply at normal temperature:　　a. Measure the voltage drop until the temperature stabilizes;　　b. 1.2 times the rated current for 1 hour and cut off the current for 15 minutes. Cycle 100 times;　　c. Measure the voltage drop after powering on for 1.5 In for 1 hour;　　d. Measure the voltage drop using the same method as A.　　Requirement: The voltage drop change before and after the test should not exceed 10%, and the identification should still be clear and distinguishable. There should be no deterioration in the end cap solder joints.

July 17,2023

NEC Thermal cutoff.thermal protector for motor

　　　　NEC Thermal cutoff has the function of detecting abnormal temperature and cutting off the circuit. It can detect abnormal temperature rise of household or industrial electrical products and quickly cut off the circuit in a timely manner, achieving the function of preventing fires from igniting.　　NEC Thermal cutoff is a kind of element that provides very reliable protection under the condition of overtemperature. It has small size, large overcurrent, non reset, stable performance, convenient installation, and a certain range of humidity settings and bearing capacity for selection to meet customer application needs.　　The products are widely used in various motors, copiers, fax machines, HID ballasts, fluorescent lighting ballasts, transformers, chargers, battery packs, heating appliances, electric irons, hair dryers, electric stoves, rice cookers, electric kettles, coffee pots, ventilation fans, electric fans, sewing machines, water heaters, power converters, power plug sockets, refr

October 28,2023

youtube fuseschool.Does the fuse have a resistance value?

　　　　Fuses have resistance values, but in fact, even wires have resistance. However, the resistance of the wires is very small (the nature of the conductor), which is usually ignored in general circuit calculations. However, the resistance of a fuse is significantly higher than that of an equally long wire, so that it can protect the circuit.　　The fuse is marked with "5A 250V", indicating that the maximum current allowed for Shenzhen fuses is 5A, which is called the rated current; The maximum voltage allowed to pass through is 250V, which is called the rated voltage. If the current or voltage exceeds the rated value, the fuse will blow, causing the circuit to open, thus protecting the consumer (without a fuse, the consumer may be burned out).　　The principle of fuse blowing is Joule's law. Joule's law: The heat generated by an electric current passing through a conductor is proportional to the square of the current, to the resistance of the conductor, and to the time it is energized. Jou

+86 755 89762685

MB:+86 13924633629 Ms.vicky

E-mail: waimao@xcfuse.com


Factory :

XC Electronics(Shenzhen)Corp.,LTD

Add: Jinyuan Industrial zone,Heao, Henggang, Shenzhen 518115,China


Shenzhen branch: Shenzhen Xucheng Electronic Commerce co.Ltd

Add: 8-15 Jinyuan Industrial zone,Heao, Henggang, Shenzhen 518115,China

About Us Products Resource Solutions Certifications News & Events Contact Us

© Copyright. xc 2023. All rights reserved.粤ICP备11049369号