2410 fuse_mini cooper fuse box factory_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

09 2024-09

Share:

　　 2410 fuse

　　2410 fuse "is a common type of fuse, also known as 2410 SMD fuse. The size of this fuse is 2.4mm x 1.0mm, hence its name. Here is some information about the function of 2410 fuse on batteries:

　　Overcurrent protection: 2410 fuses are mainly used for overcurrent protection in batteries or other power systems. When the current exceeds the rated current of the 2410 fuse, it will quickly disconnect the circuit, preventing excessive current from flowing through the battery and ensuring that the battery is not overloaded or damaged.

　　Short circuit protection: 2410 fuses can also serve as short circuit protection in battery systems. When a short circuit occurs in the battery system, the 2410 fuse will quickly cut off the circuit, preventing high current from flowing through the short circuit path through the battery, thereby reducing the potential danger caused by the short circuit.

　　Security assurance: The safety of battery systems is crucial for both users and devices. The application of 2410 fuses on batteries can provide an additional layer of safety protection, preventing potential risks caused by current overload and short circuits, ensuring the safety and stability of the battery system.

　　It should be noted that when selecting a suitable 2410 fuse, the selection should be based on factors such as the design parameters, rated current, and rated voltage of the battery system. Ensure that the characteristics of the selected fuse match the requirements of the battery system to achieve effective protection and safety performance.

Read recommendations:

temperature sensor wifi

air conditioner fuse in car

Structure of fuse and fuse.tv blown fuse symptoms

Introduction to the Structural Design of Fuse Tube.pptc fuse full form

PREVIOUS:blade fuse holder.100A temperature fuse

Return

Next：How to choose fuses for new energy products

Related News

August 06,2024

The reason why fuses often burn out.

　　　　1. It is voltage instability, which can cause electrical power frequency variation and result in frequency variation of the current passing through the fuse, causing the fuse to burn out.　　2. It is due to the excessive use of electrical appliances with high power, exceeding the ability of fuses to pass current normally.　　3. It was your place that underwent power line renovation, which allowed for an increase in current, but you did not replace the fuses with thicker ones accordingly.　　4. It's just that the fuse itself is aging, used for too long, and passes through current for a long time. As we all know, fuses also have a certain resistance, so when passing current, they will heat up, become thinner and thinner, and the resistance will become larger and larger, ultimately leading to burnout. In addition, fuses may become thinner during long-term storage due to friction, slow air oxidation, and other reasons.　　1. You can first use the appliances separately, that is, turn them on on

December 25,2023

plug in mcb for old fuse box.Working principle of self recovery fuse

　　　　The polymer overcurrent protection element is made of polymer materials with conductive particles added. The basic principle is an energy balance: when the current flows through the component, heat is generated due to the power consumption of the current, and some of the generated heat is dispersed and sent to the environment, while others increase the temperature of the polymer material. At the corresponding working current, the heat generated by the component and the heat dissipated reach a balance, and the current can pass through normally. When excessive current is generated, the component rapidly generates heat that cannot be dissipated in a timely manner, resulting in an increase in the temperature of the polymer material inside the component. When the temperature reaches the crystallization and melting temperature of the material, the polymer material rapidly expands, blocking the conductive path composed of conductive particles, resulting in a rapid increase in electrical r

August 23,2024

how to test water heater thermostat

　　What material is used to make self recovering fuses (PPTC)　　Self healing fuse (PPTC) is an electronic component used for overload protection, which can isolate current overload and automatically restore normal working state after the overload disappears. The PPTC fuse is made of a special polymer material, and under overload conditions, its resistance will quickly rise, limiting the passage of current. This article will provide a detailed introduction to the materials, manufacturing processes, and characteristics of PPTC fuses, as well as their applications in the field of electronics.　　PPTC fuses are mainly composed of thermistor materials, insulation materials, and conductive materials. Among them, thermistor material is the core component of PPTC fuse, which has temperature response performance. When current passes through a fuse, heat is generated inside the material, causing the temperature of the thermistor material to rise. When the temperature exceeds the triggering temperatu

September 14,2024

temperature controller honeywell

　　What is a surface mount crystal oscillator　　In the field of modern electronics, accurate clock signals are crucial for the normal operation of devices. As a compact and stable clock source, surface mount crystal oscillators have become an important component of electronic devices, providing stable clock signals for various devices.　　1、 Introduction to Surface mount Crystal Oscillators　　Surface mount crystal oscillator is a small electronic component that integrates an oscillator and crystal components. It adopts precise crystal oscillation technology, which can generate stable frequency signals for driving system clocks of various electronic devices.　　2、 The advantages of surface mount crystal oscillators　　Compact and convenient: The surface mount crystal oscillator adopts surface mount packaging, which is compact in size and suitable for compact circuit design. It can save valuable space and facilitate fast surface mount soldering.　　High frequency stability: The surface mount crysta

August 29,2024

temperature control mattress protector

　　Choose the self recovery fuse model　　Maintain current: The maximum amount of current that a resettable fuse can withstand before tripping and transitioning from a low resistance state to a high resistance state. The holding current of the fuse is higher than the maximum power in the circuit, so it will not trip during normal operation.　　Trip current: The amount of current that causes a fuse to trip and disconnect the circuit. Resettable fuses have a higher tripping current than traditional fuses and are designed to quickly trip under overcurrent conditions. The tripping current usually exceeds the holding current.　　Rated voltage: The maximum voltage at which a fuse can operate safely without breakdown. The rated voltage of the selected fuse must match or exceed the circuit voltage used.　　Maximum current: The maximum amount of electricity that can be passed through the above fuse, which can cause the fuse to overheat and potentially cause damage. The maximum rated current is usually s