An invisible guardian to protect your beloved car_mini cooper fuse box factory_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

01 2024-08

Share:

　　

　　In the world of cars, every tiny detail can affect overall performance and safety. Car fuses, this seemingly inconspicuous small component, are the invisible guardians that protect the entire vehicle's electrical system.

　　Our car fuses adopt advanced processes and technologies, with the characteristics of high precision and high reliability. They can respond to circuit abnormalities in the shortest possible time, quickly cut off current, prevent electrical system overheating or short circuits, and protect your car from damage.

　　Not only that, our fuses also have the advantage of being easy to install and replace, making it more convenient and efficient for you to use. Whether it's a new or old car, our fuses can provide you with the best protection solution.

　　Choose our car fuses, so that your car can feel the meticulous care every time it is started. Safety is no small matter, details can be found in the real chapter. Let's work together to safeguard your beloved car.

Read recommendations:

motor fuse selection

fast acting fuse types

ceramic fuse circuit breaker

surface mount fuse manufacturer.Application of Self Recovery Fuses in Overcurrent Protection of Electronic Ballasts

Basic Introduction to Temperature Control Fuses.lighting circuit fuse rating

PREVIOUS:The shape of patch fuses

Return

Next：Safety is no small matter, the choice of fuse is crucial

Related News

November 21,2023

car charger fuse replacement.Precautions for using fuses

　　　　1. The patch fuse is connected in series with the circuit, installed vertically, and installed on each phase line; Fuses are not allowed to be installed on the neutral line of two phase three wire or three phase four wire circuits.　　2. The power input terminal of the spiral fuse should be connected to the center point of the base, and the output wire should be connected to the threaded shell; This fuse is used in places with vibration.　　3. When the power load is greater than 60A and the lighting or heating load (220V) is greater than 100A, tubular fuses should be used.　　4. The voltage circuit and electrical control circuit of the electricity meter should be equipped with control fuses.　　5. Porcelain plug-in fuses shall be made of qualified lead alloy wire or copper wire, and multiple strands of fuse wire shall not be used instead of a large fuse wire.　　6. The fuse should be intact and undamaged, and the contact should be tight and reliable. Combined with the maintenance of the powe

August 06,2024

The reason why fuses often burn out.

　　　　1. It is voltage instability, which can cause electrical power frequency variation and result in frequency variation of the current passing through the fuse, causing the fuse to burn out.　　2. It is due to the excessive use of electrical appliances with high power, exceeding the ability of fuses to pass current normally.　　3. It was your place that underwent power line renovation, which allowed for an increase in current, but you did not replace the fuses with thicker ones accordingly.　　4. It's just that the fuse itself is aging, used for too long, and passes through current for a long time. As we all know, fuses also have a certain resistance, so when passing current, they will heat up, become thinner and thinner, and the resistance will become larger and larger, ultimately leading to burnout. In addition, fuses may become thinner during long-term storage due to friction, slow air oxidation, and other reasons.　　1. You can first use the appliances separately, that is, turn them on on

August 07,2024

can i use a fast blow fuse instead of a slow blow

　　Analysis of factors causing fuse breakage　　1. The concept of fuses　　Fuse, also known as current fuse, is defined as a "fuse link" in the IEC127 standard. When a circuit malfunctions or is abnormal, the current continues to rise, and the rising current may damage some important or valuable components in the circuit, or even burn out the circuit and cause a fire. If the fuse is correctly installed in the circuit, it will automatically melt and cut off the current when the current abnormally rises to a certain height and heat, thus protecting the safe operation of the circuit.　　2. Working principle of fuse　　When current flows through a conductor, it will generate heat due to the presence of a certain resistance in the conductor. And the heat generation follows this formula:　　Q=0.24I2RT　　Among them, Q is the heat generation, 0.24 is a constant, I is the current flowing through the conductor, R is the resistance of the conductor, and T is the time for the current to flow through the condu

September 11,2024

heater for greenhouse thermostat

　　What metal is a fuse　　A fuse is an important component that plays a protective role in a circuit, usually made of a specific metal or alloy.　　Common fuse materials mainly include low melting point metals such as lead tin alloy and zinc. Lead tin alloy is a widely used fuse material with a low melting point, generally between 183 ℃ and 232 ℃. When the current in the circuit exceeds the rated current of the fuse, the fuse will melt due to temperature rise, thereby cutting off the circuit and protecting electrical equipment and circuits from damage caused by excessive current. The advantages of lead tin alloy are its relatively stable melting point and low cost. At the same time, its conductivity is also good, allowing current to pass through under normal working conditions and quickly melting under abnormal conditions.　　In addition to lead tin alloy, zinc is also a commonly used fuse material. The melting point of zinc is about 419.5 ℃, which is relatively high. But in specific circuit

August 24,2024

electric baseboard heater protector

　　The IO output port of the microcontroller controller requires PPTC self recovery fuse protection　　Firstly, understand what PPTC self recovery fuse is. PPTC fuse is a protective electronic component that changes its resistance value according to temperature changes. Under normal working conditions, PPTC fuses have very low resistance and excellent conductivity. However, when the current exceeds the set value, the PPTC fuse will heat up and the resistance value will rapidly increase, thereby limiting the current flow and protecting the circuit from overload. Once the current drops to a safe range, the PPTC fuse will automatically resume normal operation. This self-healing feature makes PPTC fuses very suitable for protecting the IO output ports of microcontroller controllers.　　Single chip microcontroller is a commonly used microprocessor in modern electronic devices, used to control and manage the operation of various external devices. The IO output port is a channel that connects the