Guarding of Low Temperature Fuse Intelligent Equipment_mini cooper fuse box factory_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

27 2024-07

Share:

　　 954eb5f041f200

　　With the advancement of technology, the functions of electronic devices are becoming increasingly powerful, but the accompanying circuit safety issues cannot be ignored. Our low-temperature fuses are designed to solve this problem. It can not only accurately monitor temperature changes, but also quickly cut off power when necessary to avoid equipment damage due to overheating.

　　Core advantages:

　　-Precise temperature control: using advanced temperature sensing technology to monitor circuit temperature in real-time.

　　-Instant power outage: Once abnormal temperature is detected, immediately cut off the power supply to protect equipment safety.

　　-Long life design: high temperature resistance, anti-aging, longer service life.

　　Application scenarios:

　　-Smart home: smart speakers, smart lighting, household appliances, etc.

　　-Communication equipment: base stations, routers, switches, etc.

　　-Medical equipment: monitors, therapeutic devices, diagnostic equipment, etc.

　　Let low-temperature fuses become the caring guardians of your smart devices, bringing you a worry free user experience. Safety is no small matter, choose us, choose peace of mind.

Read recommendations:

electric motor thermostat

automotive blade fuse

power fuse inverter

heater for garage with thermostat.Characteristics of disposable blown fuses

Application of Self Recovery Fuses in the Protection of Rolling Gate Motors.slow blow fuse vs fast blow fuse

PREVIOUS:primos 250 solar thermal controller.The difference between a fuse resistor and a fuse

Return

Next：Low temperature fuses safeguard future technology

Related News

November 06,2024

rheem water heater thermostat

　　Meaning and Interpretation of Current Fuse Markings　　The markings on a current fuse carry important information that is crucial for proper selection, installation, and use in electrical circuits. Understanding these markings is essential for ensuring the safe and efficient operation of the fuse and the overall electrical system.　　Voltage Rating:　　One of the common markings on a current fuse is the voltage rating. This indicates the maximum voltage that the fuse can safely handle in a circuit. For example, a fuse marked with a voltage rating of 250V means that it should not be used in a circuit where the voltage exceeds this value. If a fuse is subjected to a voltage higher than its rating, it may break down or fail to operate properly, potentially leading to a short circuit or other electrical hazards. The voltage rating is based on the insulation and structural characteristics of the fuse. It ensures that the fuse can withstand the electrical stress imposed by the applied voltage wi

August 06,2024

How to install a fuse for 220V

　　　　The size of a 220 volt fuse should be calculated based on the power consumption of the device. According to Ohm's law, current equals power divided by voltage. Taking a 600 watt iron as an example, its current is approximately 2.8 amperes. If the current is too high during startup, multiply it by 1.5 and choose a 5 ampere fuse　　A 220 volt electricity requires a fuse, and the current is different. You need to choose the fuse according to the actual electrical appliance you are using. Generally, for a 1 kW appliance, a fuse of 5 amps or more is needed, and so on. For a 2 kW appliance, a fuse of 10 amps or more is needed. The higher the power of the electrical appliances used, the greater the current of the installed fuses. This requires determining the appropriate fuse size based on the actual overall power consumption.

November 15,2023

heater for garage with thermostat.Characteristics of disposable blown fuses

　　　　The main difference between slow fuse and fast fuse is their ability to withstand instantaneous pulse current, which means that they can withstand the impact of surge current when switching on and off, ensuring the normal operation of the equipment. Therefore, slow fuse is often referred to as surge resistant fuse. From a technical perspective, slow melting fuses have a large melting heat value of I2t, and the energy required for fuse melting is relatively high. Therefore, for fuses with the same rated current, slow melting has a much stronger ability to withstand pulses than fast melting.　　Product features:　　Disposable function: After a circuit fault occurs, the fuse opens, the equipment stops running, and responds quickly to the fault current. It cannot be reused　　Small size: The compact design saves circuit board space.　　Chip packaging: suitable for reflow soldering, easy and fast to use.　　Easy installation: The fuse has no polarity and can be connected in series to the circuit

August 14,2024

temperature regulating mattress protector

　　How to replace car fuses?　　Replacing car fuses is a relatively simple but very important maintenance task. The correct replacement steps are as follows:　　1. Prepare tools: Usually only a small screwdriver or a specialized fuse removal tool is needed.　　2. Turn off the engine and all electrical equipment: Ensure that the vehicle is turned off and all electrical equipment (such as lights, audio, etc.) is turned off.　　3. Find the fuse box: Most vehicles' fuse boxes are located under the dashboard or engine hood in the cockpit. The specific location can be found in the vehicle's user manual.　　4. Identify faulty fuses: Open the fuse box and check the status of each fuse. A faulty fuse usually has a clear broken line.　　5. Remove the faulty fuse: Use a screwdriver or specialized tool to gently clamp both ends of the fuse and pull it out. Be careful not to apply too much force to avoid damaging the fuse box.　　6. Install a new fuse: Select a new fuse with the same rated current and insert it i

November 21,2023

plastic fuse box regulations.What are the materials of fuses

　　　　Fuses, also known as current fuses, are defined as "fuse links" in the IEC127 standard. It is an electrical appliance installed in a circuit to ensure safe operation of the circuit. It is a type of fuse　　The fuse material is mainly made of low melting point alloys such as aluminum antimony alloy. Fuses must be easily melted metal wires in order to fuse in a timely manner and provide protection when the current is high, so lead antimony alloy wires are usually used.　　A general fuse consists of three parts: one is the melt part, which is the core of the fuse and plays a role in cutting off the current when blown. Fuses of the same type and specification should have the same material, geometric size, and resistance value as small and consistent as possible. It is important to have consistent fusing characteristics, and household fuses are commonly made of lead antimony alloy; The second is the electrode part, which usually has two important components that connect the melt to the circ