how to reset a resettable fuse_mini cooper fuse box factory_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

15 2024-10

Share:

　　Characteristics of SMD Fuses

　　SMD fuses possess several distinct characteristics that make them widely used in electronic circuits. One of the main features is their small size. The surface mount design allows for compact integration into printed circuit boards, saving valuable space. This is especially important in modern electronics where miniaturization is a key trend.

　　They offer high reliability. SMD fuses are manufactured with precise techniques and quality control, ensuring consistent performance. The materials used are carefully selected to provide stable electrical and thermal properties. SMD fuses also have a relatively low resistance. This helps to minimize power losses in the circuit and ensures that the normal operation of the circuit is not affected. Their fast response time is another advantage. When an overcurrent situation occurs, they can quickly interrupt the circuit, protecting the downstream components from damage. The packaging of SMD fuses provides good protection against environmental factors such as moisture, dust, and mechanical stress. They are also easy to install using automated surface mount technology equipment, increasing production efficiency. Additionally, SMD fuses are available in a wide range of current and voltage ratings, allowing for flexibility in circuit design. They can be used in various applications, from consumer electronics to industrial equipment, providing reliable overcurrent protection in different operating conditions.

Read recommendations:

rv air conditioner fuse location

time delay vs fast acting fuse

mini vs micro blade fuse.Development of SMD chip fuse market

Safety is no small matter, the choice of fuse is crucial

PREVIOUS:heater with thermostat control

Return

Next：pptc resettable fuse datasheet

Related News

December 04,2023

overheat protection device.What is the model of commonly used patch fuses?

　　　　Chip fuses can be divided into 9 categories based on their volume size: 0402 volume, 0603 volume, 0805 volume, 1206 volume, 1210 volume, 1812 volume, 2410 volume, 2920 volume, and 4012 volume. The most commonly used volumes for SMD fuses are 1206, 18122410, and 0603, followed only by a small amount of remaining volume.　　The commonly used models for SMD self recovery fuse 1206 include ASMD1206-020 (0.2A/24V), ASMD1206-025 (0.25A/16V), ASMD1206-050 (0.5A/6V), ASMD1206-050-16V (0.5A/16V), ASMD1206-050-24V (0.5A/24V), ASMD1206-075 (0.75A/6V), ASMD1206-100 (1A/6V), ASMD1206-150 (1.5A/6V), ASMD1206-200 (2A/6V), and ASMD1206-300 (3A/6V).　　The commonly used models for SMD self recovery fuse 1812 include ASMD1812-010, ASMD1812-020, ASMD1812-050, ASMD1812-050-30, ASMD1812-075, ASMD1812-110, ASMD1812-110-16, ASMD1812-150, ASMD1812-200, ASMD1812-300, and ASMD1812-350.　　The commonly used models for SMD self recovery fuse 0603 are ASMD0603-010, ASMD0603-020, ASMD0603-050, and ASMD0603-075.　　The

September 06,2024

blade fuse holder.100A temperature fuse

　　100A temperature fuse　　1、 Understand 100A temperature fuse　　A 100A temperature fuse is a thermal sensitive protective component with a rated current of 100 amperes. It adopts high-quality materials and reliable circuit structure, which can quickly cut off the circuit when the current exceeds the rated value or the temperature rises abnormally, protecting the circuit and equipment from damage.　　2、 The advantages of 100A temperature fuse　　High rated current: 100A temperature fuse has the characteristic of high rated current, which can provide reliable protection for high-power circuits and effectively prevent circuit faults caused by overload and current short circuit.　　Quick response: The 100A temperature fuse adopts the principle of thermal sensitivity and has the ability to respond quickly. Once the current exceeds the rated value or the temperature rises abnormally, the fuse can immediately cut off the circuit to avoid potential danger.　　Stability and durability: The 100A temperatu

September 26,2024

battery distribution fuse block

　　Glass tube fuse　　Glass tube fuse is a common circuit protection component that plays an important role in electronic devices and electrical systems.　　Glass tube fuses are usually composed of glass tubes, metal wires, and metal caps at both ends. Glass tubes have good insulation properties and transparency, making it easy to observe the condition of the internal metal wires. The metal wire is the core part of a fuse, and its material and thickness determine the rated current and melting characteristics of the fuse.　　The working principle of glass tube fuses is based on the thermal effect of current. When the current in the circuit exceeds the rated current of the fuse, the metal wire will heat up. If the current continues to be too high, the temperature of the metal wire will rise enough to cause it to melt. Once the metal wire melts, the circuit will be cut off, thereby protecting other components in the circuit from damage caused by excessive current.　　Glass tube fuses have multiple

November 23,2023

ptc resettable fuse tutorial.Self recovery fuse selection steps

　　　　(1) When used at room temperature of 25 ℃, know the actual average working current I and voltage V at the location where PPTC is installed, regardless of instantaneous current　　(2) Select a self restoring fuse series component based on the I value, V value, product category, and installation method (DIP or SMD).　　(3) If the internal environmental temperature of the device is greater than 25 ℃, the self resetting fuse will reduce the passing current as the temperature increases. To maintain normal load current passing, according to the reduction rate comparison table, calculate Ih (no action current)=I/reduction rate.　　(4) Select the fuse series components according to step (2), and select the corresponding components from the specification table based on the calculated IH value in step (3). It should be emphasized that the IH value of the selected component must be greater than or equal to the IH value calculated in step (3).

September 26,2024

blower motor fuse keeps blowing

　　Surface mounted fuses　　Surface mount fuse is a new type of circuit protection component, and with the continuous development of electronic technology, its application in electronic devices is becoming increasingly widespread.　　Surface mount fuses typically adopt a miniaturized design, resembling surface mount components that can be directly soldered onto circuit boards, saving space and improving the integration of electronic devices. It is mainly composed of matrix material, metal melt, and electrode. The matrix material is generally plastic or ceramic, which has good insulation and heat resistance properties. The metal melt is the key part of the fuse, and its material and size determine the rated current and melting characteristics of the fuse.　　The working principle of patch fuses is also based on the thermal effect of current. When the current in the circuit exceeds the rated current of the fuse, the metal melt heats up. When the temperature reaches a certain value, the metal me