surface mount fuse manufacturer_mini cooper fuse box factory_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

19 2024-08

Share:

　　Application scenarios of different types of fuses

　　According to different classification standards, fuses can be classified into various types, including by shape, by purpose, by current capacity, etc. The following are several common types of fuses and their application scenarios:

　　1. Glass tube fuse: This type of fuse is typically used for small electronic devices such as radios, televisions, and computers. Its characteristics are small size and fast reaction speed.

　　2. Ceramic fuse: This type of fuse has high voltage resistance and current capacity, and is commonly used in high-voltage and high current situations, such as power transformers and distribution cabinets.

　　3. Car fuses: Car fuses are specifically used for protecting car circuits and are usually installed near the car battery or under the dashboard. Its characteristics are high temperature resistance and good seismic performance.

　　4. Slow melting fuse: This type of fuse is suitable for protecting inductive loads such as motors and transformers, and can withstand large surge currents in a short period of time without melting.

Read recommendations:

motor thermostat

12v battery fuse

Application of Self Recovery Fuses in Transformer Protection.solar panel fuse location

bimetal thermostat for samsung refrigerator

PREVIOUS:resettable 15 amp fuse

Return

Next：plastic fuse box regulations

Related News

August 08,2024

temperature balance quilted mattress protector

　　How to design chip fuses　　In electronic products, chip fuses have two functions: to protect end-users from harm and to protect circuits from damage. These features benefit both device users and manufacturers. In the past decade, the market demand for electronic devices serving information technology, mobile, and consumer applications has been rapidly increasing. Along with this rapidly growing demand, the risk of unexpected situations in electronic devices has also increased, requiring the use of overcurrent protection devices such as chip fuses to avoid electrical overload and other risks.　　Before analyzing the electrical characteristics of various chip fuses in the market, the most important thing is to first understand the basic design principles behind each technology.　　Standard fuses may be based on metal wires placed inside sealed ceramic or glass tubes filled with air or sand, while chip fuses are based on completely different principles. Most chip fuses appear to be standard

November 27,2023

mini blade fuse supplier.Chip fuse can meet the highest requirements

　　　　Traditional fuses have a characteristic: if pulse currents and high temperature fluctuations occur, their properties will change. Every pulse and temperature fluctuation occurs, the performance of the fuse is weakened, and SCHURTER's UAI 1206 is not affected by this due to its special fuse structure. SCHURTER refers to it as "trace in air" technology, and the ability of the UAI to resist current pulses smaller than the melting heat value (I2t) is greatly improved. UAI 1206 does not actually require general derating use. In addition, due to its unique design, the fuse can greatly suppress temperature fluctuations.　　The design of UAI 1206 complies with UL 248-14 standards and was originally developed specifically for automotive applications. There are two versions of this product, with rated currents of 5.3 A and 7.5 A, and a rated voltage of 32 VDC. The rated breaking capacity is 100 A. UAI 1206 meets all requirements of the AEC-Q200 standard. Even in the event of high levels of pul

December 04,2023

pptc resettable fuse price.The application fields of SMD fuses

　　　　1. Product certification. For example, exporting to North America requires UL or CSA certification. At present, products exported to Europe still need to comply with the RoHs directive of the European Union, which is commonly referred to as environmental certification such as SGS.　　2. The normal working current of the circuit. The working current through the fuse should not exceed 75% of the rated current of the fuse.　　3. The applied voltage applied to the fuse. Usually, patch fuses are used in portable devices, and the working voltage of the circuit is generally not high. As long as the rated voltage of the patch fuse is higher than the working voltage of the circuit, it can be used with confidence.　　4. The ambient temperature of the fuse. When applying patch fuses to portable devices, appropriate consideration should be given to the temperature rise of the fuse, that is, the reduction of the rated current of the fuse. The ambient temperature during fuse operation should be within

October 14,2024

heater with fan and thermostat

　　Importance of Current Fuses in Electronic Devices　　Current fuses play a vital role in electronic devices. Firstly, they protect the internal components of electronic devices from over - current damage. In an electronic device, such as a laptop or a smartphone, there are numerous delicate components like integrated circuits, transistors, and capacitors. If there is a sudden increase in current due to a short - circuit in the power supply or a malfunction within the device, these components can be easily damaged. The current fuse acts as the first line of defense. It will blow when the current exceeds its rated value, preventing the excessive current from reaching and harming these sensitive components.　　Secondly, current fuses contribute to the overall safety of the device. In some cases, an over - current situation can lead to overheating, which may not only damage the device but also pose a risk of fire or electric shock. By cutting off the current, the fuse helps to avoid such dang

July 29,2024

Model and specifications of fuses

　　　　The model and specifications of fuses are important reference for selecting and using fuses. The following are common fuse models and specifications:　　1. Rated current: This is one of the most important parameters of a fuse, indicating the maximum allowable current of the fuse under normal operating conditions. When selecting a fuse, the rated current should be slightly greater than the maximum operating current of the circuit.　　2. Rated voltage: Refers to the maximum allowable voltage of the fuse under normal operating conditions. If the voltage in the circuit exceeds the rated voltage of the fuse, the fuse may not function properly.　　3. Breaking ability: This measures the ability of a fuse to cut off current in the event of a short circuit. The breaking capacity is usually expressed in amperes or kiloamperes, and the choice needs to be determined based on the actual needs of the circuit.　　4. Resistance: Although the main function of a fuse is to protect the circuit, it also has a